AC VFD adjustable speed medium voltage variable frequency drive for plastic extruder

Features

Benefits

Open Loop Vector and V/Hz Control with Torque Compensation

Provides excellent breakaway torque for thick materials and constant torque to maintain mixing speeds under heavy loads.

Overtorque Detection

Provides early warning of damaging torque levels as a result of seizing mixer blades.

Torque Reference programmable to an analog output

The applied mixing torque is fine tuned or adjustable for different material.

Preset frequency reference

Preset mixing patterns can be established for different materials.

Auto-Restart after momentary power loss

Mixing can quickly restart after fault or momentary power loss. This keeps perishable foods from spoiling in process.

Power loss Ride-Through

The mixing process in not interrupted during brief power loss (< 5 ms).

Item

Specification

Input frequency

50/60Hz

Output frequency

0-400Hz

Overload current

150% rated current 1min.

Control mode

Close-loop vector control, sensor-less vector control, V/F control

Starting torque

150% 1hz (with PG 0hz)

Control precision

±0.2% (With PG ±0.02%)

Torque precision

±5%

Setting frequency resolution

Digital command 0.01hz; analog command 0.03hz/60hz

Output frequency resolution

0.01Hz

Frequency setting signal

-10V~+10V；0~+10V(20kΩ)；4~20mA

Protection function

Over voltage, under voltage, over load, relay, overheat speed stall, grounding, instant power cut compensation( within 2 sec for operation mode. Continue to operate after the power is available), Charging protection( not to display when the dc voltage of main circuit is less than 50v)

Enclosure

IP20

Cooling mode

forced air cooling

Vibration

Less than 0.2g for 20hz

Ambient temperature / Humidity

-10 Degrees~+40 Degrees / 20~90%Rh (no condensation)